Here (a "quick" and safe, secure) Material calculation "expanding Shrine" incl. beton floor old part, Nyom
Chanroth asked for to forward to Nyom
Vithou , who asked him. )
5,6 m3 concrete (incl material for 450 cement bricks):
Cement 2to
Sand 8 m3
Iron 5mm 500m1
Iron 8mm 360 m1
Iron 10mm 120m m1
(all maybe 300kg, =0.3 to)
ribble roof sheets (as "lost" formwork of roof) = 25 m2
door (200x80) = 2 pieces
window (150x80) = 3 pieces
window (80x100) = 2 pieces
(doors and windows can be made by oneself with old cast of wood, if avaliable)
(Iron could be reduced to all in 8mm instead of the some 10mm)
formwork wood (cheap, 1cm): 5 m2 (= 5 boards 5x0.2m)
(floor plattes/tales, gray or dirty white or brick red (no design, mono color) = 18 (new area) = 25m2 (old) = about 45 m2
scaffold wood (wood from death yound trees, 3-4cm, death bamboo) from the woods around): 25 pieces about 3m
Wall painting color white (only inside): 30m2
PVC-Pipe (rain water): 80mm: 5m; 50mm: 10m
others:
- nails (4cm, 8cm)
- wire to bind iron
- what ever old, cast off wood board, scantling
- padlock
This material should be enough for the whole expandig part incl. restore of old part complete this useable.
(painting of samvega art and the four noble truth (gray, black) by dhammic artist. Color (black), and brushs.
Old wall and floor will be cut in squares and reused).
Works:
- water protection in on north side outside
- covering of no-stone parts in the old area (water, animal and falling down of dirt and stones - protection)
- remove of old wall by steps when a roof section is finisched
- even floor in old part (refilling ground of new part)
- construction works for new roof part
- small walls and roof at the east entrance and nord
Bildingparts:
restor old part of shrine, higher room high and no more walking bend over, to gain no head hit, necessary (~25 m2)
new tract (~ 20 m2)
entrance restored and closed
stairways (east entrance, south-west secondary door)
water collection of about 60 m2 rain surface (30 m3 water with one strong rain)